Comments 6

A handsome corner cupboard

A handsome hand made corner cupboard which made me think…

A few weeks ago I visited some relatives in Spartanburg, South Carolina and had the good fortune to see this handsome corner cupboard. I was taking a break from work, football games and the Tornado Bed and seeing this cupboard was timely. You see, I had just experienced frustration with my bed project: I had been drilling holes and fitting dowels through some pegged mortise and tenon joints. During this process, some tear-out developed around the holes, which I was hoping to avoid. If you are not familiar with tear-out, see some examples in the cupboard photos below (click to enlarge)…

Not sure how old this cupboard is. The wood certainly shows some age. Note the grain in the panels run in different directions.

A close-up shows tear-out around the pegs utilized in the joinery.

I am very much a perfectionist in my woodworking. Even though I don’t build the most challenging furniture, the projects I do build, I want them to be pretty much perfect. This includes a nice, clean hole for a pegged joint. But this very handsome cupboard has some tear-out, so is there a lesson here for me? Should I get so torn up about tear-out?

My uncle who owns this piece wondered if it was machine made to which I would confidently say no. It has the look of a piece made by hand. More clues…

The top and the cornice moulding don’t align just right.

The pegs are aligned sort of haphazardly.

Also you will note in the first photo that the upper doors which contain two panels have boards with grain which run in different directions, indicating to me thought on the craftsman’s part: “the grain of this smaller panel should run horizontally and the longer, narrow panel should run vertically.” It seems to me that such thought would not enter into a mass produced piece.

Anyone who happeneds upon this cupboard would have to be jealous. I wish I had one this nice, so well designed and proportioned. Note the size of the display area and the balance with the lower storage space. Note the intricate cornice moulding and bracket feet and how they don’t over power the piece. Note the nice subtle color of the wood. For an unknown craftsman, this was a successful project even though it is not perfect.

So how should I view imperfections in my own projects? I should always strive for improving my skills, but such things are also tell tale signs for future observers that what they are looking at is furniture made by hand. It is one thing to build a bed that falls apart a week after being set up and it is another thing altogether to have a slight imperfection that many people will not even notice.

I should relax a little and take it all in stride – stop sweating the little things so much.

This entry was posted in: Design
Tagged with: ,


During the week, I sell flooring products for The Dixie Group. Weekends, you'll find me in my basement workshop making furniture.


  1. That is a very good point Jeff about not sweating the small stuff. Only you will even notice much of the nicks and dings of a project. I can really relate to this.

    I love seeing this piece of Danny's.

  2. Jane, it is a fine line. You know the how people talk about the little things making all the difference. But it is also a learning process.

  3. You hit on a great topic. Many associate ANY imperfections as bad. I could not disagree more. WE are humans. WE make mistakes. WE are not machines that are controlled by a computer that dials things down to .001.” Strive to do your best. Strive to grow. Strive to do something better than the last time, but never forget that YOU/WE are humans. Imperfections are as normal as breathing. Imperfections help us to do better. Embrace them with all your heart. 🙂 Cheers!

  4. perfection has to do with the eye of the beholder. I look at somethings and I see nothing but beauty and then other things I can't get by because of it's problems.

    In my woodworking it is like that. in the milling and other parts of the woodwork a tear out or chip doesn't bother me but the finsh a whole different story.

    Keep up the post.

Leave a Reply to Jeff Branch Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s